xPC Target

PCI-20098C Digital Input

Use a separate diver block for each port. By selecting the digital input driver block, the port is configured as input.

Scaling Input to Output

Hardware Input	Block Output Data Type	Scaling
TTL	Double	TTL low = 0.0 TTL high = 1.0

Driver Block Parameters

Number of Channels -- Enter a number between 1 and 8 to select the number of digital input lines used with this port.

Port Number -- From the list, choose either A or B to identify the port used with this block of I/O lines.

Sample Time -- Enter a base sample time or a multiple of the base sample time.

Base Address or Carrier Board (ie: 0xd000) -- Enter the base address of the board. This entry must corresponds to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter

• 0x300
  

PCI-20098C Analog Input (A/D)

PCI-20098C Digital Output