Burr-Brown (xPC Target)

xPC Target

PCI-20098C Digital Output

Use a separate diver block for each port. By selecting the digital output driver block, the port is configured as output.

Scaling Input to Output

Hardware Output
Block Input Data Type
Scaling

TTL
double
< 0.5 = TTL low
> 0.5 = TTL high

Hardware Output	Block Input Data Type	Scaling
TTL	double	< 0.5 = TTL low > 0.5 = TTL high

Driver Block Parameters

Number of Channels -- Enter a number between 1 and 8 to select the number of digital output lines used with this port.

Number lines beginning with 1 even if the board manufacturer starts numbering lines with 0.

Port Number -- From the list, choose either A or B to identify the port used with this block of I/O lines.

Sample time -- Enter a base sample time or a multiple of the base sample time.

Base Address or Carrier Board (ie: 0xd000) -- Enter the base address of the board. This entry must corresponds to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter

```
0x300
```

PCI-20098C Digital Input ComputerBoards (Measurement Computing)