| xPC Target | |
Scaling Input to Output
| Hardware Input |
Block Output Data Type |
Scaling |
| volts |
double |
1 |
Driver Block Parameters
Number of Channels -- If single-ended is chosen from the MUX list, then enter a number between 1 and 16 to select the number of single A/D channels used. If differential is chosen from the MUX list, then enter a number between 1 and 8 to select the number of differential A/D channels used. This driver does not allow the selection of individual channels or a different MUX setting for each channel.
Range -- From the list, choose either +-10V (-10 to +10 volts), +-5V (-5 to +5 volts), or 0-10V.This driver does not allow the selection of a different range for each channel. The input range is the same for all A/D channels
MUX (16/8) -- From the list, choose either 16 single-ended or 8 differential. This entry must correspond to the MUX-switch setting on the board.
Sample time -- Enter the base sample time or a multiple of the base sample time.
Base Address or Carrier Board (ie: 0xd000) -- Enter the base address of the board. This entry must correspond to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter
| | PCI-20098C | PCI-20098C Digital Input | |