DSP Blockset

Step 5 -- Set the Rest of the Blocks' Parameters and Connect the Blocks.   

1. Set the parameters for the rest of the blocks as indicated in the following table; leave any parameters not listed in the table in their default settings.
2. Connect the blocks as shown in Figure , Model Using the Digital Filter Block to Implement Filters,. (You may need to resize some of the blocks to make your model look like the one in the figure.)
   
   

   Parameter Settings for the Other Blocks

   Block	Parameter Setting
   Matrix Concatenation	Number of inputs -- 3 Concatenation method -- Horizontal
   Random Source	Source type -- Uniform Minimum -- 0 Maximum -- 4 Sample mode -- Discrete Sample time -- 1/1000 Samples per frame -- 50
   Sine Wave	Frequency (Hz) -- 75 Sample time -- 1/1000 Samples per frame -- 50
   Sum	Icon shape -- rectangular List of signs -- ++
   Vector Scope	Scope properties: Input domain -- Time Time display span (number of frames) -- 1

Step 4 -- Set the Highpass Digital Filter Block Parameters

Step 6 -- Set Simulation Parameters and Run the Model