| Getting Started | |
Running the FSK Model
Set the Stop time parameter to 15 and run the model.
Displaying the Signal's Spectrum in the Spectrum Scope
The Spectrum Scope displays the spectrum of the modulated signal, as shown in the following figure.
Note the peaks at 9500 Hz and 10500 Hz, representing the integers 1 and 0, respectively. The peaks outside the range 9500 to 10500 Hz are side lobes, which are not relevant to the display.
Displaying the Errors in the Scope
Double-click the Scope block to open the scope, as shown in the following figure.
Displaying Errors in the Scope
The top window displays the transmitted signal. The middle window displays the received signal. The bottom scope displays a 0 where the two signals agree and a 1 where they differ.
| | Setting Parameters in the FSK Model | Delays in the Model | |
