| xPC Target | |
Scaling Input to Output
| Hardware Input |
Block Output Data Type |
Scaling |
| TTL |
double |
TTL low = 0.0 TTL high = 1.0 |
Driver Block Parameters
Carrier ID -- Enter the Carrier ID of the IP carrier board into which the IP module is plugged.
In order to use an IP module, it must be physically plugged into an IP carrier board and the model must contain a block representing this carrier board. Each carrier block has a `Carrier ID' parameter, which must be set to a number not shared by any other carrier board block in the model.
Channel vector -- Enter numbers between 1 and 24 to select the digital output lines to be used. This driver allows the selection of individual digital output lines in any order. The number of elements defines the number of lines used.
For example, to use the first three digital outputs, enter
Number the lines beginning with 1 even if the board manufacturer starts numbering the lines with 0.
Sample time -- Enter a base sample time or a multiple of the base sample time.
| | IP-Digital 24 Digital Input | IP-HiADC | |