xPC Target

Diamond-MM Analog Output (D/A)

Scaling Input to Output

Hardware Output	Block Input Data Type	Scaling
volts	double	1

Driver Block Parameters

Channel vector -- This parameter is a combined Channel vector and Range vector. The number of elements defines the number of D/A channels used.

Enter a range code for each of the D/A channels used. This driver allows a different range for each channel with a maximum of 2 channels.

The following table is a list of the ranges for this driver and the corresponding range codes. The D/A specific jumpers on the board have to be in the correct positions for the ranges entered.

Input Range (V)	Range Code	Input Range (V)	Range Code
		0 to +10	10
		0 to +5	5

For example, if the first channel is 0 to + 10 volts and the second channel is 0 to +5 volts, enter

• [10,5]
  

Sample time -- Enter the base sample time or a multiple of the base sample time.

Base address -- Enter the base address of the board. This entry must correspond to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter

• 0x300
  

Diamond-MM Analog Input (A/D)

Diamond-MM Digital Input