| xPC Target | |
Scaling Input to Output
| Hardware Input |
Block Output Data Type |
Scaling |
| TTL |
double |
TTL low = 0.0 TTL high = 1.0 |
Driver Block Parameters
Channel vector -- Enter numbers between 1 and 8 to select the digital input lines to be read. This driver allows the selection of up to 8 individual digital input lines in any order. The number of elements defines the number of digital lines used.
For example, to use all of the digital inputs enter
Number the lines beginning with 1 even though the board manufacturer starts numbering lines with 0.
Port -- From the Port list, choose either A, B, or C. The Port parameter defines which port is used for this driver block. Each port has a maximum of 8 digital inputs. In each case, one block is needed for each port.
Sample time -- Enter the base sample time or a multiple of the base sample time.
Base address -- Enter the base address of the board in hexadecimal (such as 0x300) as selected with the hardware jumpers on the board.
| Note Please consult the appropriate Diamond Ruby-MM hardware manuals for more information on jumper settings and I/O connections. |
| | Diamond Ruby-MM Analog Output (D/A) | Diamond Ruby-MM Digital Output | |