xPC Target

Quartz-MM 5 Digital Output

Scaling Input to Output

Hardware Output	Block Input Data Type	Scaling
TTL	double	< 0.5 = TTL low > 0.5 = TTL high

Driver Block Parameters

Channel vector -- Enter numbers between 1 and 8 to select the digital input lines used with this port. This driver allows the selection of individual digital input lines in any order. The number of elements defines the number of digital lines used.

For example, to use all of the digital inputs for one port, enter

• [1,2,3,4,5,6,7,8]
  

Number the lines beginning with 1 even if the board manufacturer starts numbering the lines with 0.

Sample time -- Enter a base sample time or a multiple of the base sample time.

Base address -- Enter the base address of the board. This entry must correspond to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter

• 0x300
  

Quartz-MM 5 Digital Input

Quartz-MM5 Counter PWM