xPC Target

PIO-32/32T(PCI) Digital Input

Scaling Input to Output

Hardware Input	Block Output Data Type	Scaling
TTL	double	TTL low = 0.0 TTL high = 1.0

Driver Block Parameters

I/O format -- Select serial or parallel. If you select serial, the block is configured to accept up to 32 one-bit input channels. If you select parallel, the block is configured to accept a single 32-bit input channel and the channel vector parameter is unavailable.

Channel vector -- If you selected serial I/O format, enter a vector of numbers to specify the input channels for serial I/O format. For example, to use the first and third digital input channels enter

• [1, 3]
  

The channel numbers can occur in any order, but the numbers must lie in the range 1 to 32.

Sample time -- Enter the base sample time or a multiple of the base sample time.

PCI slot -- If only one board of this type is physically present in your target PC, enter

• -1
  

Otherwise, enter the PCI slot number of the particular board to be controlled by this block. To find the slot number, use the command

• getxpcpci all
  

The Device ID of this board is 8152.

Contec PIO-32/32T(PCI)

PIO-32/32T(PCI) Digital Output