ComputerBoards (Measurement Computing) (xPC Target)

xPC Target

PC104-DAS16JR/12 Digital Output

Scaling Input to Output

Hardware Output
Block Input Data Type
Scaling

TTL
double
< 0.5 = TTL low
> 0.5 = TTL high

Hardware Output	Block Input Data Type	Scaling
TTL	double	< 0.5 = TTL low > 0.5 = TTL high

Driver Block Parameters

Number of Channels -- Enter a number between 1 and 4 to select the number of digital output lines used. This driver does not allow the selection of individual digital output lines.

Sample time -- Enter the base sample time or a multiple of the base sample time.

Base address -- Enter the base address of the board. It is important that this entry corresponds to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter

```
0x300
```

The switch and jumper settings, that are not mentioned here, have no influence on the running of xPC Target.

PC104-DAS16JR/12 Digital Input PC104-DAS16JR/16