| xPC Target | |
The CIO-DIO24H has one 8255 chip with 3 ports (A,B,C). Each port has a maximum of 8 digital I/O lines that can be configured as inputs or outputs.
Use a separate diver block for each port. By selecting the digital input driver block, the port is configured as input.
Scaling Input to Output
| Hardware Input |
Block Output Data Type |
Scaling |
| TTL |
double |
TTL low = 0.0 TTL high = 1.0 |
Driver Block Parameters
Channel vector -- Enter numbers between 1 and 8 to select the digital input lines used with this port. This driver allows the selection of individual digital input lines in any order. The number of elements defines the number of digital lines used.
For example, to use all of the digital inputs for one port, enter
Number the lines beginning with 1 even if the board manufacturer starts numbering the lines with 0.
Port -- From the list choose either A, B, or C. The I/O board has a 8255 chip with 3 ports. The Port parameter defines which port of the 8255 chip is used for this driver block. Each port has a maximum or 8 digital lines that can be configured as inputs or outputs depending on which driver block is chosen. In each case, one block is needed for each port.
Sample time -- Enter a base sample time or a multiple of the base sample time.
Base address -- Enter the base address of the board. This entry must corresponds to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter
| | CIO-DIO24H | CIO-DIO24H Digital Output | |