xPC Target

PCI-20003M Analog Output (D/A)

Scaling Input to Output

Hardware Output	Block Input Data Type	Scaling
volts	double	1

Driver Block Parameters

Channel vector -- This parameter is a combined Channel vector and Range vector. The number of elements defines the number of A/D channels used.

Enter a range code for each of the A/ D channels used. This driver allows a different range for each channel with a maximum of two A/D channels.

The following table is a list of the ranges for this driver and the corresponding range codes.

Input Range (V)	Range Code	Input Range (V)	Range Code
-10 to +10	-10	0 - 10	10
		0 - 5	5

For example, if the first channel is -10 to + 10 volts and the second channel is 0 to +5 volts, enter

• [-10,5]
  

The jumpers W1 to W5, W13, W14, W27, W31, W7 to W11, W30, W32 on the module must correspond to this range setting.

Sample Time -- Enter the base sample time or a multiple of the base sample time.

Module Number -- Enter a number from 1 to 3 to identify the connector on the carrier board where the I/O module is inserted. This driver verifies if the module is placed on the specified module connector.

Base Address or Carrier Board (ie: 0xd000) -- Enter the base address of the board. This entry must correspond to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter

• 0x300
  

PCI-20003M

PCI-20019M