xPC Target

CAN-AC2-PCI

This is the CAN-board for the PCI-bus offering two CAN ports. The CAN-controllers used on the board are the SJA1000 from Philips. In its standard hardware configuration the board is designed for both Standard and Extended identifiers for Highspeed CAN. Piggyback modules are available (one for each port) which add Lowspeed CAN support in order to switch between Highspeed and Lowspeed CAN controlled by the driver block. The board is a memory mapped PCI device, which uses 64k Bytes of address space. The address space is assigned automatically by the PCI BIOS of the target PC and lies usually in the range between 2G bytes and 4G bytes. Any new projects where a desktop PC is used as the target system should use this board and not the ISA board described above.

CAN-AC2

CAN-AC2-104