xPC Target

CAN FIFO Driver Blocks for the CAN-AC2-PCI with Philips SJA1000 CAN-Controller

The driver blocks described here support the CAN-AC2-PCI using FIFO mode. The Philips SJA1000 chip is used as the CAN controller in this configuration and supports both Standard and Extended identifier ranges in parallel. The driver block set for this board is found in the xPC Target I/O block library in the group CAN/Softing.

The third block group highlighted above contains the FIFO mode sub group.

The highlighted group then contains all driver blocks available for FIFO Mode CAN.

FIFO Mode Drivers for CAN Boards from Softing

FIFO Setup Driver Block