| xPC Target | |
The FIFO Reset XMT driver block is used to reset the transmit FIFO. This will delete all messages currently stored in the transmit FIFO and reset the level counter to 0. As an example, you can use this driver block to reset the transmit FIFO after having detected a fault condition.
The block has a single input port of type double. If a scalar value of 1 is passed, the transmit FIFO gets reset,. If a scalar value of 0 is passed, no action takes place.
The dialog box of the block lets you define the following settings.
Board -- Defines which physically present board is accessed to reset the transmit FIFO. For more information about the meaning of the board number see the Setup driver block described above. If just one board is present in the target system, board number 1 should be selected.
Sample time -- Defines the sample time at which the FIFO Reset XMT driver block is executed during a model (target application) run.
| | FIFO Read XMT Level Driver Block | FIFO Read RCV Level Driver Block | |
