xPC Target    

Test 3, Reboot Target Using Direct Call

This test tries to boot your target computer using an xPC Target command. If this test fails, try troubleshooting with the following procedure:

  1. In the MATLAB Command Window, type
  1. This command reruns the test without using the reboot command and displays the message

  1. Observe the messages in the MATLAB Command Window during the build process.
  1. Reboot fails, but build okay when reboot skipped -- If the command xpctest skips the reboot command, and successfully builds and loads the target application, the problem could be that some target hardware does not support the xPC Target reboot command. In this case, you cannot use this command to reboot your target computer. You need to reboot using a hardware reset button.

If you still cannot solve your problem, see If You Still Need More Help.


  Test 2, Ping Target System xPC Target Ping Test 4, Build and Download Application