Embedded Target for Texas Instruments C6000 DSPs    

Confirming Your C6711 DSK Installation

Texas Instruments supplies a test utility to verify operation of the board and its associated software. For complete information about running the test utility and interpreting the results, refer to your TMS320CDSK Help under TMS320C6000 Code Composer Studio Help in the Code Composer Studio 2.0 online help system.

To run the C6711 DSK confidence test, complete the following steps after you install and configure your board.

  1. Open a DOS command window.
  2. Access the directory \..\ti\c6000\dsk6x11\conftest
  1. CCS creates this directory when you install your software. It contains the files to run the C6711 confidence test.

  1. Start the confidence test by typing dsk6xtst at the DOS prompt.
  1. By default, the test utility creates a log file named dsk6xtst.log where it stores the test results. To specify the name and location of a log file to contain the results of the confidence test, use the CCS command line options to run the confidence utility. For further information about running the confidence test from a DOS window and using the command line options, refer to the DSK Confidence Test topic in the online help for CCS.

  1. Review the test results to verify that everything works.

If your confidence test fails, reconfigure your C6711 DSK. After you change your board configuration, rerun the confidence utility to check your new settings.


  Targeting Your C6711 DSK Testing Your C6711 DSK