Preface (Embedded Target for Motorola MPC555)

Embedded Target for Motorola MPC555

Embedded Target for Motorola MPC555 Demos

We have provided a number of demos to help you become familiar with features of the Embedded Target for Motorola MPC555.

If you are reading this document online in the MATLAB^® Help browser, you can launch the demos by clicking on the links in the Command column of the following table.

Alternatively, you can access the demo suite by typing commands from the Command column of the table, at the MATLAB command prompt, as in this example:

```
mpc555rt_led
```

Embedded Target for Motorola MPC555 Demos
Command
Demo Topic

mpc555pil_fuelsys
Model configured for building a Configurable Subsystem for use in PIL cosimulation. See Tutorial 1: Building and Running a PIL Cosimulation.

mpc555rt_led
Simple model demonstrating use of device driver blocks provided with the Embedded Target for Motorola MPC555 real-time target. See Tutorial: Creating a New Application.

mpc555rt_io and
mpc555rt_iohost
Demonstration of MPC555 I/O device driver blocks and CAN support. A subsystem of the mpc555rt_io model runs on target hardware. The subsystem code communicates, via a CAN channel, with the mpc555rt_iohost model, running in Simulink®. This demo requires Vector-Informatik CAN hardware and drivers. See the instructions in the demo models
Note: you can also use the mpc555rt_io model alone in simulation; this demonstrates the use of the pass-through feature of the device driver blocks.

mpc555rt_ccp
Demonstrates use of the CAN Calibration Protocol. See CAN Calibration Protocol.

mpc555dd_fuelsys
This model demonstrates the use of MPC555 I/O device driver blocks in simulation, software-in-the-loop simulation, and PIL cosimulation. Input and output signals are conditioned (with respect to data type and scaling) appropriately for use with the device driver blocks.

**Embedded Target for Motorola MPC555 Demos**
Command	Demo Topic
mpc555pil_fuelsys	Model configured for building a Configurable Subsystem for use in PIL cosimulation. See Tutorial 1: Building and Running a PIL Cosimulation.
mpc555rt_led	Simple model demonstrating use of device driver blocks provided with the Embedded Target for Motorola MPC555 real-time target. See Tutorial: Creating a New Application.
mpc555rt_io and mpc555rt_iohost	Demonstration of MPC555 I/O device driver blocks and CAN support. A subsystem of the mpc555rt_io model runs on target hardware. The subsystem code communicates, via a CAN channel, with the mpc555rt_iohost model, running in Simulink®. This demo requires Vector-Informatik CAN hardware and drivers. See the instructions in the demo models Note: you can also use the mpc555rt_io model alone in simulation; this demonstrates the use of the pass-through feature of the device driver blocks.
mpc555rt_ccp	Demonstrates use of the CAN Calibration Protocol. See CAN Calibration Protocol.
mpc555dd_fuelsys	This model demonstrates the use of MPC555 I/O device driver blocks in simulation, software-in-the-loop simulation, and PIL cosimulation. Input and output signals are conditioned (with respect to data type and scaling) appropriately for use with the device driver blocks.

Using This Guide Related Products